Kurzweil Forte SE Musician's Manual page 193

Hide thumbs Also See for Forte SE:
Table of Contents

Advertisement

Keymap and Sample Editing
The Keymap Editor
New Range (NewRng)
The NewRng button lets you define a new keyrange to edit, whether it's to assign a different
sample, or to adjust the pitch or volume. Just press NewRng, then play the note you want
as the low note, then the high note. The Forte SE will prompt you for each note. When you
trigger the high note, you'll return to the Keymap-editor page, and the new keyrange you
defined will be selected. The next change you make will affect only that edit range.
If you set a new keyrange that's completely within an existing key range, the existing key
range will be split into two keyranges, with the new keyrange between the two. At this
point, you must change at least one parameter of the new keyrange before editing a different
keyrange, otherwise the new keyrange will be merged with the adjacent keyranges. If you
set a new keyrange that overlaps part or all of another key range, the sample assigned to the
lower key range will be applied to the new keyrange. Again, at this point you must change
at least one parameter of the new keyrange before editing a different keyrange, otherwise the
new keyrange will be merged with the lower keyrange that it overlapped.
Assign
The Assign soft button lets you select a sample, then specify the key range to which it's
assigned. This enables you to insert a new key range within the current keymap. When you
press the Assign soft button, a dialog appears that prompts you to select a sample from the
Samples list. Scroll through the list, then press the OK soft button. You'll then be prompted
to define the new key range by playing the notes you want to be the lowest and highest notes
of the range. (Press the Cancel soft button if you change your mind.) When you trigger the
low and high notes, the new key range is inserted. If the new key range partially overlaps an
adjacent key range, the existing key range will be adjusted to accommodate the new range.
If the new key range completely overlaps an existing key range, the original key range will be
replaced.
9-7

Advertisement

Table of Contents
loading

Table of Contents