Table of Contents
Advertisement
MidiBank
The MIDI Bank parameter determines the MIDI Bank change message that the currently
selected Zone sends when the Multi is loaded. You can set this parameter to a MIDI Bank
change message from 0 to 16383.
When using the Forte SE as a MIDI controller, sending a MIDI Bank change message (along
with a MIDI Program change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want.
For example, if you've configured a Multi to work in a specific way with Program 32 in
Bank 5 of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32.
This way, whenever you load this Multi, the sound module will automatically load Program
32 in Bank 5.
NOTE :
When you change the Program parameter, the MIDI Bank and MIDI Pro-
gram parameters will automatically change to match the Bank and Program num-
bers of the Program that you select for Local Program. For example, if you choose
Program 178, then MIDI Bank will change to 1 and MIDI Program will change to
50.
MidiProg
The MIDI Program parameter determines the MIDI Program change message that the
currently selected Zone sends when the Multi is loaded. You can set this parameter to a
MIDI Program change message from 0 to 127.
When using the Forte SE as a MIDI controller, sending a MIDI Program change message
(along with a MIDI bank change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want. For
example, if you've configured a Multi to work in a specific way with Program 32 in Bank 5
of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32. This
way, whenever you load this Multi, the sound module will automatically load Program 32 in
Bank 5.
EntryPrgChg
The Entry Program Change parameter determines whether or not the currently selected
Zone will send a MIDI Program change message when the Multi is loaded. You can set this
parameter to either Off or On. When set to On, the Zone will send a MIDI Program change
message with the Program specified for the MIDI Program parameter.
Status
This displays the current Zone status (active or muted).
Multi Edit Mode
MAIN Page
11-9
Advertisement
Table of Contents
