Audio Input - Kurzweil Forte SE Musician's Manual

Hide thumbs Also See for Forte SE:
Table of Contents

Advertisement

In Program Mode, tempo controls the rate of each Program's arpeggiator, as well as the
rate of any tempo based Insert or Aux effects that each program may use. In Multi Mode,
program tempos are ignored and the Multi Common Tempo of each Multi is used for all
programs in a Multi.
For details on setting a tempo for each program, see the Tempo parameter on the Prog
Arpeggiator page in the Program Edit Mode chapter. When the Global Mode ProgTempo
parameter is set to "Program", programs can still use the System tempo by setting Tempo to
"System" on the Program Edit Prog Arpeggiator page.

Audio Input

The Audio Input parameter controls the volume of devices plugged into the rear "Audio In"
jack. The default setting of 0dB should work well for most sources (such as MP3 players).
Adjust this parameter if the Audio Input signal is too quiet or too loud in comparison to the
sounds of the Forte SE.
Sound Sel
The Sound Sel parameter is shown when the User Type parameter is set to Advanced.
The Sound Sel parameter determines the behavior of the Program/Multi Sound Select
buttons when selecting Program or Multis. When Sound Sel is set to Category, the Program/
Multi Sound Select buttons select one of the 16 IDs in the currently selected category. When
Sound Sel is set to ID number, the Program/Multi Sound Select buttons behave as a numeric
pad, allowing you to select any Program or Multi (regardless of the currently selected
category) by typing the ID number and pressing the Enter button.
When the User Type parameter is set to "Regular", category based sound selection will be
will be used.
Multi Controllers
When a multi is selected, this parameter determines how the sliders respond to movement.
When set to instant, moving a slider will result in the assigned parameter immediately
jumping to the slider position. With some parameters an abrupt change to the sound may
be undesirable. In this case set this parameter to PassEntry and the slider will only become
active when the slider is moved past the Multi Entry Value. This results in smooth changes to
the sound.
Global Mode
MAIN Page
12-5

Advertisement

Table of Contents
loading

Table of Contents