Table of Contents
Advertisement
Delete
Press the Delete soft button to delete the current Chain (factory Chains can not be deleted).
Press Delete, and you will be given a choice to Delete or Cancel. Press Delete again, and an
"Are You Sure?" message will appear. Press Yes to delete the Chain, or Cancel to cancel.
HELP
Press the HELP soft button to view the Help page, where you can view a description of
functions assigned to the Favorites buttons.
Favorites 1: Help
Press the Favorites 1 button to view the HELP page.
Favorites 5: Bypass Box
Press the Favorites 5 button to temporarily bypass the currently selected FX box in the
Chain. Press the Favorites 5 button again to re-enable the selected box.
Effects Parameters
This section contains descriptions of the Forte SE's many effects parameters, and instructions
on how to use them. Read through this section to get a good general understanding of the
parameters.
The descriptions here do not include all of the parameters associated with every effect, and
some effects may not have some of the parameters described here for their category. A more
complete reference, with every effect and the meaning and range of every parameter, arranged
in the order they appear on the screen, can be found in the KSP8 Algorithm Reference Guide
on the Kurzweil website, www.kurzweil.com.
General Parameters
There are a number of parameters that are common to all or almost all effects, and we'll deal
with those first.
Wet/Dry balances the levels of the processed and unprocessed signals output from the effect.
Wet represents the processed signal, while dry represents the unprocessed signal. The range
is 0% wet (the signal is unprocessed) through 100% wet (no dry signal is present). Values
between 0% and 100% blend the two signals, for example, at 20% the output signal is
20% wet (processed) and 80% dry (unprocessed.) A setting of 50% wet means the dry and
processed signals are roughly equal in level. In some effects, separate Wet/Dry parameters
are provided for the Left and Right input channels. In some cases, this parameters can have
negative values, which indicate that the Wet signal is polarity-inverted.
The Effects Chain Editor
Effects Parameters
8-5
Advertisement
Table of Contents
