Table of Contents
Advertisement
KB3 Editor: The OUTPUT Page
Use this page to route the current program's post-FX signals. The two Pan parameters
correspond to those of the VAST Program editor OUTPUT page (See
Gain parameter corresponds to those of the VAST Program Editor COMMON page (See
page
7-16).
Exp Pedal
Use this parameter to set which rear panel CC Pedal input will control volume for the
current KB3 program. With a setting of Expression/Foot, volume can be controlled by a CC
pedal plugged into either the rear panel input labeled CC Pedal 1 (volume), or the rear panel
input labeled CC Pedal 2 (wah). With a setting of Expression, volume can be controlled by
a CC pedal plugged into the rear panel input labeled CC Pedal 1 (volume). With a setting
of Foot, volume can be controlled by a CC pedal plugged into the rear panel input labeled
CC Pedal 2 (wah). With a setting of None, volume control from both CC pedal inputs is
disabled.
KB3 Editor: The LFO, ASR, FUN, and ARP Pages
The rest of the pages—LFO, ASR, FUN, ARP1 and ARP2 — are the same for KB3
programs as they are for VAST programs, so we won't describe them again here. For
descriptions of these pages see:
The LFO Page on page 7-43
The ASR Page on page 7-46
The Function (FUN) Page on page 7-47
The Arpeggiator Function on page 7-55
Program Edit Mode
KB3 Editor: The OUTPUT Page
page 7-40
). The Out
7-95
Advertisement
Table of Contents
