Table of Contents
Advertisement
Multi Edit Mode
CCTLS (CCs/Continuous Controllers) Page
Controller
Number
161
162
168
170
171
172
173
174
175
176
177
178
180
181
Shift Key Number, Shift Key (ShKeyNum, ShiftKey)
These controller destinations allow you to play musical scales and single note patterns on any
programmable continuous controller in a Multi, without the need of playing the physical
keys of the keyboard. These features are especially useful for playing fast arpeggiations. These
destinations only work when combined with other destinations and features, so be sure to
read this whole section to gain a complete understanding.
Shift Key Number (ShKeyNum, controller destination 176) works in a similar way to
Key Number (KeyNum, controller destination 134). Both controllers basically generate a
monophonic stream of notes. The difference is that Key Number plays through all notes
chromatically, while Shift Key Number only plays notes relative to a Shift Pattern.
11-20
Controller
Destination
Sends an "all notes off" message and an "reset all controllers" message on all 16
Panic
MIDI channels.
Solo Zone - Values above 64 will solo the zone that sends values to this destina-
tion, values below or equal to 64 will unsolo the zone. When a zone is soloed, the
Zone Mute button LED for the soloed Zone will turn red. All other Zones will be
SoloZn
muted and their Zone Mute button LEDs will turn orange. Pressing any muted/or-
ange Zone buttons will make that Zone the soloed zone. Pressing the soloed zone
button will cancel solo mode. To return to Solo mode the original controller assigned
to Solo Zone (162) will need to be re-engaged.
TapTempo
Tap Tempo (See
Sets ARPEGGIATOR values for Shift to negative. 0-63 = off, 64-127 = on. (See-
-Arp Shift
Shift (Shift Amount) on page
Selects one of the 128 patterns in the current ARPEGGIATOR ShiftPatt Bank. (See
ShiftPatt
Shift Pattern (ShiftPatt) on page
A controller value selects the corresponding ShiftPatt Bank for the ARPEGGIATOR
ShiftPBank
page of a controller's zone. For example, controller value 2 selects ShiftPatt bank 2,
controller value 7 selects ShiftPatt bank 7.
Selects one of the 128 patterns in the current ARPEGGIATOR VelPatt Bank.
VelPatt
(SeeVelocity Pat on page
A controller value selects the corresponding VelPatt Bank for the ARPEGGIATOR
VelPBank
page of a controller's zone. For example, controller value 2 selects VelPatt bank 2,
controller value 7 selects VelPatt bank 7.
Set's arpeggiator velocity when ARPEGGIATOR velocity is set to Fixed.
VelFixed
Mode on page
ShKeyNum
Shift Key Number (see below)
ShiftKey
Shift Key (see below)
Same as 176 ShKeyNum, but the Shift Pattern's velocity will be modified by the
ShKeyNuV
current velocity pattern of the zone.
Selects the Intonation Map (IDs 0-127) in a MIDI channel in real time. On the Multi
Chan Intonation
Edit CONTROLS page, when setting a switch controller to this Destination the
name of the selected Intonation Map will be displayed. For example: 18 (EastMed).
Selects the Intonation Key (C through B) in a MIDI channel in real time. On the Multi
Edit CCTLS page, when setting a switch controller to this Destination the MIDI num-
Chan Int Key
ber and note name of the selected Intonation Key will be displayed. For example:
41 (D#).
Description
TEMPO on page
12-16)
7-61)
7-62)
7-64)
7-63)
(Velocity
Advertisement
Table of Contents
