Main Page - Kurzweil Forte SE Musician's Manual

Hide thumbs Also See for Forte SE:
Table of Contents

Advertisement

Multi Edit Mode

MAIN Page

Vol (Zone Volume)
The VOL parameter displays the volumes of each Zone. By default, VOL is set to 127, which
results in each Zone having the same volume. To change volumes use the Alpha Wheel or
Previous/Next buttons. A Zone volume can be set to any number between 0 and 127.
Pan
The Pan parameter determines the Pan MIDI message that the currently selected Zone sends
when the Multi is loaded. You can set this parameter to any pan setting from None, 0 (full
left pan) to 127 (full right pan). To pan to center, select 64 for this parameter.
MAIN Page
The Main Page shows the current settings that are specific for the currently selected Zone.
The top right hand corner of the display indicates the currently selected Zone of the total
available Zones.
Program
Destination
Channel
MidiBank
BankMode
MidiProg
EntryPrgChg
Status
Program
The Program parameter determines the Program to be loaded for the currently selected
Zone. You can set this parameter to any Forte SE Program (1 – 2047). The display shows the
Program number and name.
The Value Jump double button press (Previous- and Next+ buttons) jumps to selecting the
first Program of each Category, as well as the Category Default Program of each Category (if
a Category Default Program has been set).
11-6
Parameter
1-1027
NONE, LOCAL, MIDI, MIDI+LOCAL,
USB, USB+LOCAL, USB+MIDI,
USB+LOCAL+MIDI
1 to 16
None, 0 to 16383
None, Ctl 0, Ctl 32, Ctl 0/32, K2600
(Depends on BankMode)
On, Off
Active, Muted
Range Of Values
Default Value
1
USB+LOCAL+MIDI
1
-
Ctl 0/32
-
On
Current Zone Status

Advertisement

Table of Contents
loading

Table of Contents