Table of Contents
Advertisement
2. Connect the flash drive to the USB STORAGE slot of Forte SE.
3. Follow the instructions specified on
4. In System Mode, select System Update.
5. Select USB Device as the storage type.
6. If the system was able to read the USB flash drive that was plugged in, it will display
a list of files and folders as shown above. You can use the navigation buttons or Alpha
wheel to move up and down the list. Select the UP soft button if you want to go up to
the parent directory level. If the KUF file is selected, select the OK button.
page 13-1
to enter System Mode.
System Mode
System Update
13-3
Advertisement
Table of Contents
