Table of Contents
Advertisement
Making Precise Alignment Adjustments
If you still notice dark or light bands in your printouts after running the print head alignment, you can
make precise alignment adjustments.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Setup.
5. Select Maintenance.
You see a screen like this:
6. Select Improve Horizontal Streaks.
7. Select Proceed.
8. Do one of the following:
• Increase the setting to reduce dark bands in your printouts.
• Decrease the setting to reduce light bands in your printouts.
9. Select OK.
Parent topic:
Cleaning the Paper Guide
If you see ink on the back of a printout, you can clean the paper guide rollers to remove any excess ink.
1. Make sure there are no errors on the LCD.
home button, if necessary.
Print Head Alignment
303
Advertisement
Table of Contents
