Table of Contents
Advertisement
Code
422
423
425
428
Parent topic:
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the
4. Select Setup.
5. Select Maintenance.
You see a screen like this:
Condition/solution
An authentication error has occurred. Make sure the settings are correct for the folder
selected in the Where to Forward setting in the Setup menu.
A communication error has occurred. It is also possible that a file with the same name is
open or the file is a read-only file.
Check the network connection, make sure the settings are correct for the folder selected
in the Where to Forward setting in the Setup menu, close the duplicate file, or disable
read-only protection.
There is not enough storage space available in the forwarding destination folder. Increase
the storage space in the destination folder.
The destination was wrong or the destination does not exist. Make sure the settings are
correct for the folder selected in the Where to Forward setting in the Setup menu.
Solving Problems
home button, if necessary.
313
Advertisement
Table of Contents
