Paper Ejection Problems; Solving Pcl/Postscript Problems - Epson WF-M5694 User Manual

Caution: Make sure you do not load the ADF beyond its capacity for your paper size. Also make sure
the originals you load are not bent, folded, or curled and do not have tape, staples, or other materials
that could obstruct the feeder.
12. Follow the prompts on the LCD screen to clear any error messages. If you still see a paper jam
message, check the other paper jam solutions.
Parent topic:
Related references
Paper Jam Problems in the Cassette
Paper Jam Problems Inside the Product
Paper Jam Problems in the Duplexer (Rear Cover)
Related topics
Loading Paper

Paper Ejection Problems

If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
Parent topic:
Related references
Document Jams in the Automatic Document Feeder
Paper Jam Problems in the Cassette
Paper Jam Problems Inside the Product
Paper Jam Problems in the Duplexer (Rear Cover)
Paper or Media Type Settings - Printing Software
Paper Type Settings - Control Panel
Related topics
Loading Paper

Solving PCL/PostScript Problems

Check these sections if you have problems with the PCL or PostScript printer software.
Solving Paper Problems
Solving Paper Problems
332