Emerson VOLTA CF590BQ00 Owner's Manual page 6

BP7513 Volta CF590 1/5/16
3.4
Carefully turn the partially assembled ceiling fan right
side up and position the fan on the styrofoam in
preparation for final assembly (Figure 4).
3.5
Remove the hanger ball by loosening the Phillips head
setscrew in the hanger ball until the ball falls freely
down the 4.5" downrod (Figure 5).
Remove the pin from the 4.5" downrod, then remove
the hanger ball (Figure 5).
Retain the pin and hanger ball for reinstallation in
Step 3.11.
3.6
Separate, untwist and unkink the three 80" motor leads.
Route the three motor leads through the 4.5" downrod
(Figure 6).
10:52 AM Page 6
3. Ceiling Fan Assembly
(Continued)
Figure 4
PIN
HANGER BALL
PHILLIPS HEAD SETSCREW
(LOOSENED)
Figure 5
THREE 80" MOTOR LEADS
Figure 6
6
PARTIALLY ASSEMBLED
CEILING FAN
STYROFOAM
GREEN GROUND WIRE
4.5" DOWNROD
4.5" DOWNROD
U.L. Model No.: CF590