Emerson VOLTA CF590BQ00 Owner's Manual page 22

BP7513 Volta CF590 1/5/16
8. Light Kit Assembly Replacement
8.14
Unscrew the three plastic Phillips head screws securing
the Light Kit Assembly Array to the Light Kit Assembly
(Figure 43).
Remove the Light Kit Assembly Array from the
assembly.
Discard the Light Kit Assembly Array and three plastic
screws in the correct recycle bin.
8.15
Slide the new Light Kit Assembly Array connector
through the center hole of the Light Kit Assembly.
Position the new Light Kit Assembly Array onto the Light
Kit Assembly.
NOTE: Handle the new Light Kit Assembly Array
around the edges of the Light Kit Assembly. Being
careful not to touch the LED diodes, located on the
Light Kit Assembly Array.
Reattach the new Light Kit Assembly Array by installing
the three plastic Phillips head screws (provided with
new replacement kit) (Figure 44).
8.16
Reconnect the Light Kit Assembly Driver two pin
connector to the Light Kit Assembly Array connector
(Figure 45).
10:52 AM Page 22
22
(Continued)
Figure 43
Figure 44
LIGHT KIT ASSEMBLY LIGHT KIT ASSEMBLY
DRIVER TWO PIN
ARRAY CONNECTOR
CONNECTOR
LIGHT KIT
ASSEMBLY
LIGHT KIT
ASSEMBLY
DRIVER
Figure 45
PLASTIC PHILLIPS
HEAD SCREWS (3)
LIGHT KIT
ASSEMBLY
ARRAY
LIGHT KIT
ASSEMBLY
DO NOT TOUCH LED
LIGHTING BUDS
LIGHT KIT
ASSEMBLY
ARRAY
U.L. Model No.: CF590