Emerson VOLTA CF590BQ00 Owner's Manual page 12

BP7513 Volta CF590 1/5/16
5.3
Remove one of the three Pan Head Screws with
Lockwashers in the Light Kit Adapter and loosen the
remaining two screws (Figure 18). Retain the screw and
lockwasher for future use.
Carefully tuck all the wires into the Light Kit Adapter
prior to installing the Light Kit Assembly (Figure 18).
Position the Light Kit Assembly key hole slots onto the
two loosened Pan Head Screws with Lockwashers.
!
To avoid possible fire or shock, do not pinch wires
between the Light Kit Assembly and the Light Kit
Adapter.
5.4
Rotate the Light Kit Assembly clockwise to engage the
two Pan Head Screws with Lockwashers in the key hole
slots.
Reinstall the previously removed Pan Head Screw with
Lockwasher (Figure 19).
Retighten the three Pan Head Screws with
Lockwashers to securely assemble the Light Kit
Assembly to the Light Kit Adapter.
Spare Pan Head Screw with Lockwasher in the parts
bag.
5.5
Place the Shade into the opening of the Light Kit
Adapter/Light Kit Assembly, aligning the three flat areas
on the top edge of the Shade with the three raised
dimples on the Light Kit Adapter/Light Kit Assembly and
turn the Shade clockwise until it stops (Figure 20).
NOTE: Periodically check that the Shade is seated
fully clockwise in the Light Kit Adapter/ Light Kit
Assembly.
10:52 AM Page 12
5. Light Kit Assembly
WARNING
(Continued)
LOOSEN THE TWO PAN HEAD
SCREWS WITH LOCKWASHERS
REMOVE ONE PAN HEAD SCREW
WITH LOCKWASHER
Figure 18
ROTATE
CLOCKWISE
REINSTALL ONE PAN HEAD SCREW
WITH LOCKWASHER AND TIGHTEN
SECURELY
Figure 19
ROTATE
CLOCKWISE
FLAT AREA OF
SHADE
Figure 20
12
H
LIGHT KIT
ADAPTER
LIGHT KIT
ASSEMBLY
ENGAGE AND TIGHTEN
THE TWO PAN HEAD
SCREWS WITH
LOCKWASHERS
LIGHT KIT
ASSEMBLY
H
RAISED
DIMPLES (3)
SHADE
U.L. Model No.: CF590