Emerson VOLTA CF590BQ00 Owner's Manual page 18

BP7513 Volta CF590 1/5/16
7. How to Wire Your Ceiling Fan
7.7
Lift the ceiling cover up to the threaded studs and turn
until studs protrude through the holes in the ceiling
cover (Figure 34).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied in parts bag). (Figure 34).
Tighten the knurled knobs securely until the ceiling
cover fits snugly against the ceiling and the hole in the
ceiling cover is clear of the downrod.
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
7.8
Wire Diagram (Figure 35).
TO
120-
VOLT
SUPPLY
Figure 35
10:52 AM Page 18
WARNING
STANDARD ON-OFF WALL
SWITCH OR OPTIONAL
SW605 WALL CONTROL
BLACK
(HOT)
WHITE
GROUND
TWO-CONDUCTOR
CABLE (WITH
GROUND)
GREEN WIRE (GROUND) FROM
HANGER BALL AND HANGER
BRACKET
(Continued)
Figure 34
BLACK
BLACK
WHITE
WHITE
RED
BLUE
BLACK
BLUE
WHITE
HANGER BALL
18
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
RECEIVER
WHITE
U.L. Model No.: CF590