Emerson VOLTA CF590BQ00 Owner's Manual page 13

BP7513 Volta CF590 1/5/16
6. Optional Installation of No-Light Plate Assembly
NOTE: To use the No-Light Plate Assembly, the
Light Kit Assembly MUST NOT Be Installed, or Light
Kit Assembly MUST Be Removed.
6.1
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
Removal of the Shade from the Light Kit Adapter/
Light Kit Assembly:
Rotate the Shade counter-clockwise and remove from
the Light Kit Adapter/Light Kit Assembly (Figure 21).
6.2
Remove one of the three Pan Head Screws with
Lockwashers in the Light Kit Adapter and loosen the
remaining two screws in the key hole slots (Figure 22).
Rotate the Light Kit Assembly counter-clockwise for
removal.
Replace the screw with lockwasher previously removed
and tighten all three screws.
6.3
Disengage the black wire connector from the fan motor
assembly to the Light Kit Assembly black wire connector
(Figure 23).
10:52 AM Page 13
WARNING
ROTATE
COUNTER-CLOCKWISE
Figure 21
LOOSEN TWO PAN HEAD SCREWS
WITH LOCKWASHERS
ROTATE
COUNTER-CLOCKWISE
REMOVE ONE PAN
HEAD SCREW WITH
LOCKWASHER
Figure 22
FAN MOTOR
ASSEMBLY BLACK
WIRE CONNECTOR
LIGHT KIT ASSEMBLY
BLACK WIRE CONNECTOR
LIGHT KIT ASSEMBLY DRIVER
AND ARRAY CONNECTORS
Figure 23
Please contact 1-800-654-3545 for further assistance
13
H
LIGHT KIT
ADAPTER/
LIGHT KIT
ASSEMBLY
SHADE
H
LIGHT KIT
ASSEMBLY
emersonfans.com
U.L. Model No.: CF590