Emerson VOLTA CF590BQ00 Owner's Manual page 17

BP7513 Volta CF590 1/5/16
7. How to Wire Your Ceiling Fan
7.4
Securely connect the receiver blue wire (TO LIGHT) to
the fan motor blue wire using the wire connector
(supplied in parts bag) (Figure 31).
7.5
After connections have been made, position the
antenna wire on top of the receiver.
While inserting the receiver fully into the hanger
bracket, turn leads upward and carefully push leads
into the outlet box, with the white and green leads on
one side of the outlet box and position the black lead on
the other side of the outlet box (Figure 32).
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
7.6
Screw the two threaded studs (supplied in parts bag)
into the tapped holes in the hanger bracket (Figure 33).
10:52 AM Page 17
WARNING
(Continued)
FAN MOTOR BLUE WIRE
Figure 31
Figure 32
Figure 33
Please contact 1-800-654-3545 for further assistance
17
RECEIVER
BLUE WIRE
(TO LIGHT)
OUTLET BOX
RECEIVER
HANGER BRACKET
HANGER BRACKET
THREADED STUDS (2)
emersonfans.com
U.L. Model No.: CF590