Install Ddr Dimms S S S S - VIA Technologies P4M266A User Manual

Hide thumbs Also See for P4M266A:

Table of Contents

Please follow the following step to install DDR DIMMs.

1. Locate the DDR DIMM sockets.

2. Holding the DDR DIMM by the edges, remove it from its antistatic package.

3. Make sure the clips at either end of the socket are pushed away from the

socket.

DDR DIMM Socket

4. Position the DDR DIMM above the socket. Align the two small notches in

the bottom edge of the DDR DIMM with the keys in the socket.

5. Insert the bottom edge of the DDR DIMM into the socket.

6. When the DDR DIMM is seated, push down on the top edge of the DDR

DIMM untilthe retaining clips at the ends of the socket snap into place.

Make sure the clips are firmly in place.

Technical Reference Booklet

This Manual: http://www.manuallib.com/file/2414879

Install DDR DIMMs

Clip

Notch

Please turn off system before installing and removing any

device, otherwise you'll cause the system damage.

DDR DIMM

Clip

Table of Contents

P4x266e