Table of Contents
Advertisement
The following diagrams show the relative positions of the jumpers,
connectors, major components and memory banks on the motherboard.
# The LAN, VGA, CN11, AUX1 and CN16 connectors are optional.
# The ALC650/655 embeds an internal analog switch (by driver software) to
share LINE input with Surround output, and share MIC input with CENTER/LFE
output.
NOTE
1)
Be sure to check the cable orientation in order to match the colored strip to
the pin1 end of the connector.
2)
When you start up the system, please wait for 5 seconds after you power
on AC.
3)
It is not recommended to add a metal spacer plate on the back of the
Socket478. Otherwise, some components will be short and damaged.
This Manual: http://www.manuallib.com/file/2414879
Motherboard Layout
Motherboard Layout
Motherboard Layout
Motherboard Layout
Motherboard Layout
23
23
23
23
23
Motherboard Layout
Advertisement
Table of Contents
