Table of Contents
Advertisement
Please refer to the following steps to install the CPU.
1. Please turn off the power and unplug the power cord before installing the
CPU. Pull the lever sideways away from the socket. Make sure to raise the
lever up to a 90 degree angle.
2. Look for the gold arrow. The gold arrow should point towards the lever pivot.
The CPU can only fit in the correct orientation.
2. If the CPU is correctly installed, the pins should be completely embedded
into the socket and can not be seen. Please note that any violation of the
correct installation procedures may cause permanent damages to your
mainboard.
This Manual: http://www.manuallib.com/file/2414879
CPU Installation
CPU Installation
CPU Installation
CPU Installation
CPU Installation
35
35
35
35
35
CPU Installation
Advertisement
Table of Contents
