Christie DLV1400-DX User Manual page 37

On-line Help
Time-outs
The Global Icon
Using Slide bars and
Other Controls
013-100199-03
Downloaded From projector-manual.com Christie Manuals
If at any time you are uncertain what to do next, press
information about the current menu or highlighted option. Press
addition, a line of "hint" text is included at the bottom of some menus.
Press from the presentation level to access general Help Topics. Scroll as
Help
necessary within a topic; press
If a slide bar, menu, or message is displayed, you have limited time in which to make
a keypad entry before the projector returns to presentation level
disappears. These time-outs may vary depending on what is displayed.
Menu options that include this icon apply universally to any incoming signal.
Most of the function menus allow you to change settings by using slide bars,
checkboxes, and pull-down lists. To select a slide bar, toggle a checkbox status, or
view a pull-down list, do one of the following within the function menu:
•
Enter the menu option number corresponding to the setting you wish to change
(for example, press
Menu
Position menu).
•
Move the highlight to the option desired and press
•
Move the highlight to the option desired and press
immediately.
•
Bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation (applies only to options having their own
key, such as Contrast, Brightness, Gamma, etc.).
•
For "blind" access, hide the entire menu system (see OSD key, above) and/or
direct slide bars activated by their own key (such as Contrast, Brightness, etc.).
Control by using the proper key press or numerical sequence of key presses.
Help
or to return to your presentation.
Exit
Help
1 3 to select "Vertical Stretch" in the Size &
Section 3: Operation
to display summary
again to exit. In
Help
and the graphic
Help
(Enter).
to adjust
3-11.