Appendix G: Index - Christie DLV1400-DX User Manual

Appendix G: Index

RGB400 Active Loop-Thru
Input Module
38-804607-xx
PC250 Analog
Input Module
38-804609-xx
DVI Input Module
38-804635-xx
F-2
Downloaded From projector-manual.com Christie Manuals
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input
signals from computers or other RGB source devices. Video inputs are 75
terminated. Video outputs provide buffered loop-through to another display device.
RGB400ALT Features
•
Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
•
Accepts YPbPr, composite (on green) and Y/C (on red/blue)
•
BNC connectors for RGB signal inputs
•
Buffered loop-through video outputs
NOTE: The audio connectors are not functional.
The PC250 Analog Input Module may be installed in this projector, a Marquee Signal
Switcher or a Marquee Case/Power Supply. The module receives analog RGB input
signals from IBM PC compatibles or Macintosh computers. Video inputs are 75
terminated. Video outputs are provided for buffered loop-through to another display
device.
PC250 Analog Features
•
Accepts VGA or MAC RGB video
•
15 pin D connectors for video
•
Active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2)
The audio connectors are not functional. 3) Trademarks are the rights of their
respective owners.
This module can display digital video input signals conforming to the DVI (Digital
Visual Interface) single-channel standard.
Ω
Ω
013-100199-03