Kit Preparation - Metra Electronics 99-7431 Installation Instructions Manual

Altima, Frontier, Pathfinder, Quest,
Villager, Xterra:
1. Cut and remove all the mounting
tabs from the radio housing.
2. Secure the appropriate bracket
to the radio housing using the (4)
Phillips flat head screws provided.
(Figure A)
Continue to kit assembly
(Figure A)

Kit Preparation

200SX, Sentra:
1. Cut and remove all the mounting
tabs from the radio housing.
2. Secure the right bracket to the
radio housing using the (2) Phillips
flat head screws provided. (Figure
A)
3. Secure the right bracket to the
factory cupholder using the (1)
factory screw and (1) locating pin.
(Figure A)
(Figure A)
99-7431
4. Secure the left bracket to the radio
housing using the (2) Phillips flat
head screws provided. (Figure A)
5. Secure the left bracket to the
factory cupholder using the (1)
factory screw and (1) locating pin.
(Figure A)
Continue to kit assembly
14