Inspection And Maintenance Schedule - Body Solid GPR370.1 Owner's Manual

GPR370 ASSEMBLY INSTRUCTIONS
INSPECTIONS AND MAINTENANCE SCHEDULE
There is a risk assumed by individuals who use this type of equipment. To
minimize risk, follow the rules below.
‧ Inspect equipment daily, ensuring that all nuts, bolts and screws are fully
tightened.
‧ Inspect cables daily ensuring they are routed properly and not worn, frayed or
stretched. Check and adjust tension on cables daily.
‧ When using pop-pin adjustments, always make sure the plunger for the pop-
pin is securely inserted into an adjustment hole.
‧ Before performing any exercise, always make sure all ball-pins, ring-pins,
pop-pins and selector pins are inserted properly and all snap-links are
properly closed.
‧ Replace worn parts immediately.
‧ Human perspiration is corrosive. Clean your machine regularly. Wipe down
and dry upholstery and frame pieces on a daily basis.
‧ Every week clean the chrome guide rods with a dry cloth and apply a coat of
dry silicon spray or Teflon based spray lubricant.
‧ Every week clean and lubricate all non-chrome guide rods and all seat posts
and adjustments for starting positions.
‧ Every week check hand grips, rollers and non-skid surfaces for wear.
‧ Only use Body-Solid parts. Parts form other manufacturers or any other
modifications will void the warranty and may result in serious injury.
‧ Do not use this machine with damaged, worn or missing parts.
‧ If there is any doubt about the ability of this equipment to operate safely, do
not use the equipment until it is serviced.
‧ Please ensure that all warning stickers are visible and acknowledged by
users of the equipment.
Failure to follow these rules may result in serious injury. If unsure about
the proper use of the machine, consult your local Body-Solid distributor or
call the Body-Solid Customer Service department at 1-800-556-3113.
GPR370.1-052007
Page 4