3D Systems Cube 3rd Generation Quick Start Manual page 11

3. Connect the printer to your network. Use the up or down
arrows to scroll to your network choice and select the
network name. Select
connect to a wireless network at any time by navigating to
the Network screen and selecting WIFI.
NOTE: The printer can also connect to an ad
hoc network. Refer to the User Guide for more
information.
NOTE: The printer will attempt to connect to your
network.
NOTE: If your network is password protected, the
printer will prompt you to enter the password.
Once entered, select the
SKIP to bypass this step. You can
checkmark to continue.
8