3D Systems Cube 3rd Generation Quick Start Manual page 18

16. Insert the print jet (from the cartridge that will be mounted
on the right side of the printer) into the right print jet
opening on top of the printer. Rotate the print jet clockwise
until the dots align.
NOTE: As you rotate the print jet, ensure the print
jet tube is tucked under the top of the printer
cover.
17. Select the checkmark
18. Mount the cartridge on the right side of the printer and
select the checkmark
NOTE: The print jet will begin to heat. Once the
print jet has reached the proper temperature, the
printer will prime melted material into the refuse
bin.
to continue.
to continue.
15