Table of Contents
Advertisement
Never work on or near electricity with wet hands, wet clothing, or wet
1.4.10.5.
gloves.
1.4.10.6.
possible risk of leaking electrolyte. This electrolyte is an acid and can cause
serious injuries. Care should be taken when working on or near batteries.
1.4.10.6.1.
1.4.10.6.1.1.
1.4.10.6.1.2.
1.4.10.6.1.3.
1.4.10.6.1.4.
1.4.10.6.1.5.
1.4.10.6.1.6.
welding grinding or drill is taking place.
1.5. Additional Safety guidelines'
1.5.1. Exhaust and Engine
The engine and exhaust will become very hot during use. DO NOT touch.
1.5.1.1.
1.5.1.2.
These items remain hot for some time after use.
1.5.1.3.
Place the machine in an area where pedestrians or children are not likely to
touch the machine.
1.5.1.4.
Avoid placing any flammable materials near the exhaust outlet during
operation.
1.5.1.5.
Keep the machine at least 1 metre from buildings or other equipment, or the
machine may overheat.
1.5.1.6.
Avoid operating the engine with a dust cover.
1.5.2. Control Functions
1.5.2.1.
Oil Warning System
1.5.2.1.1.
automatically.
1.5.2.1.2.
1.5.3.
Starter Switch (SW)
1.5.3.1.
The engine starter switch controls the ignition.
1.5.3.2.
In the 'OFF' Position the ignition circuit is switched
off and the engine will not run
1.5.3.3.
In the 'ON' position the engine is ready for starting
1.5.3.4.
In the 'START' position (pushed against spring
tension) the starter motor is engaged and the machine
will start.
Batteries present a risk if they are damaged there maybe the
Should you come into contact with acid you should;
Remove all clothing contaminated with acid.
Get medical assistance as soon as possible.
Use fresh running water to wash off excess acid, continue this
until medical assistance arrives.
If the acid comes into contact with a persons or eyes the
acid needs to be immediately washed away. Make sure that you do
not wash the acid to another part of the face or body.
Gasses from charging batteries are highly flammable and great
care should be taken to charge in well ventilated areas.
Make sure the charging location is not near where hot working such as
When the pressure switch senses low oil pressure engine will stop
Unless you refill with oil the engine will not start again.
Page 6
Advertisement
Table of Contents
