Table of Contents
Advertisement
3.4. Fuel Filter Service.
3.4.1. Drain out the fuel from the fuel tank.
3.4.2. Move the clamps on the pipes away from the filter connections. Clamp the pipe
above the fuel filter.
3.4.3. Remove fuel filter and fit a replacement and re-position clamps on
filter.
3.5. Checking the Generator before start up.
3.6. Running-in periods of Operation.
3.6.1. The first 20 hours are the running-in period of the engine. For this reason, it is
important to follow the following instructions during this period.
3.6.1.1.
Warm up the engine 5 minutes after the initial starting, before applying load.
3.6.1.2.
Avoid applying loads above 3kw during the first 20 hours of operation.
It is important to replace the engine oil as per the schedule recommended
3.6.1.3.
by the manufacturer.
3.6.1.4.
Replace the engine oil whilst the engine is warm.
3.6.1.5.
Ensure that old engine oil is drained out completely.
Be sure to turn off the main breaker switch before starting. The
generator should be earthed to prevent electric shocks.
Turn off the main breaker switch and remove all loads.
Before starting the engine, be sure to switch OFF any appliances
connected to it.
Ensure that the breaker switch is OFF before switching between
115v/230v.
Page 12
Advertisement
Table of Contents
