Table of Contents
Advertisement
1.5.4. AC Switch (Breaker)
1.5.4.1.
The AC Switch (Breaker) will turn 'OFF' automatically
when the load connected exceeds the generator output.
1.5.4.2.
If AC switch turns 'OFF' then before resetting remove all
of the load connected to the machine. Make sure you keep the
load required below the rated output of the machine.
Then turn on the equipment making sure not to overload
1.5.4.3.
the machine.
1.5.5.
sockets in your building – commonly known as 'back feeding' it is
extremely dangerous and illegal.
DO NOT Connect the generator to Mains AC
Page 7
Advertisement
Table of Contents
