Paper Menu; Paper Details - Canon ipf815 User Manual

Printer Parts > Control Panel
Setting Item
Test Print
Information

Paper Menu

Cut Sheet Type ( *1
Roll Media Type ( *1
Roll Length Set
ManageRemainRoll
9
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types of
Paper.")
Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if you up-
date paper information by using the Media Configuration Tool. See Media Configuration Tool
Media Configuration Tool

Paper Details

(The type of paper is dis-
played here.)
( *1
→P.726
724
Main Menu Settings
Downloaded from ManualsPrinter.com Manuals
>
Choose Paper Details to print the paper settings as specified in Paper Details.
Choose Print Job Log to print a record of print jobs, including the paper type and size,
amount of ink used, and so on. (Information on ink consumption is general, not specific
in nature.)
Choose Menu Map to print a list of the main menu options.
Choose Nozzle Check to print a test pattern for checking the nozzles.
Select Color Palette to print the GL2 color palette.
Displays printer information and an error log. (See " Information .")
Setting Item
)
→P.724
)
→P.724
The types of paper indicated in the printer driver and related software (as well as on the
→P.617
.
→P.539
Setting Item
Roll DryingTime
Scan Wait Time
)
Description, Instructions
Description, Instructions
Choose the type of sheets.
(See "Selecting the Paper Type (Sheet).")
Choose the type of roll.
(See "Selecting the Paper Type (Roll).")
Displayed if ManageRemainRoll is On.
If a barcode is not printed on rolls, specify the roll length.
The roll length is displayed in meters or feet, depending
on the setting in Length Unit.
Choose On to print a barcode at the end of a roll before
you remove it. The printed barcode can be used in manag-
ing the amount of roll paper left. Choose Off if you prefer
not to print the barcode.
(See "Keeping Track of the Amount of Roll Paper
Left.")
→P.639
Description, Instructions
Specify the time to wait for the ink to dry for each sheet.
Specify the time to wait for the ink to dry between each
scan (after the printhead finishes moving in one direction),
in consideration of how quickly the ink dries. Also specify
the applicable area for the ink drying time. Select Entire
area to apply the ink drying time after each scan until the
document is fully printed. Select Leading edge to apply
the ink drying time after each scan only in the area 110–
160 mm from the leading edge. (The applicable length
varies depending on the Print Quality setting.) Note that
printing will take longer if you specify the Scan Wait
Time setting. In particular, when Leading edge is selec-
ted, colors may be uneven in the boundary between the
areas with and without a drying time.
→P.734
→P.650
→P.632
or
→P.406
iPF815