Canon ipf815 User Manual page 795

3.
If a password has been set on the printer, enter the password.
4.
Click Information in the Device Manager menu at left to display the Information page.
5.
To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security, de-
pending on what information you want to specify.
6.
Refer to the table of settings for device information and security as you complete these settings.
Device Information Settings
Item
Device Name
Location
Administrator
Phone
Comments(E-mail)
Security Settings
Item
Old Password
New Password
Confirm
Besides entering a password, you can specify other security-related information, such as IP address-based SNMP or
TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP authentication settings.
7.
Click OK to activate the settings.
iPF815
Downloaded from ManualsPrinter.com Manuals
Details
Enter a device name.
(0–32 characters)
Enter the location where the device is installed.
(0–32 characters)
Enter the administrator's name.
(0–32 characters)
Enter the administrator's contact information.
(0–32 characters)
Enter any comments regarding the administrator.
(0–32 characters)
Details
Enter the current device password.
(0–14 characters)
Enter the new password.
(0–14 characters)
Enter the new password again to confirm it.
(0–14 characters)
Network Setting
Default Setting
blank
blank
blank
blank
blank
Default Setting
blank
blank
blank
Specifying Printer-Related Information
> Network Setting >
10
779