Hp-Gl/2 Jobs Are Printed 6 Mm Larger Than Specified - Canon ipf815 User Manual

HP-GL/2 jobs are printed 6 mm larger than specified

The page size of the HP-GL/2 print job, as created in the source ap-
plication, is incorrect.
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
The page size of the HP-GL/2 print job, as cre-
ated in the source application, is incorrect.
HP-GL/2 printing takes a long time.
Large print jobs with a lot of data take longer to print.
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause
The printer is analyzing the
print job.
iPF815
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Cause
Either wait a while for printing to resume, or on the printer Control Panel, set Input
Resolution to 300dpi.
(See "Main Menu Settings.")
Troubleshooting
In MAIN MENU, set PageSizeProcess1 to On.
(See "Main Menu Settings.")
Corrective Action
In MAIN MENU, set PageSizeProcess2 or Conserve Paper to On.
The layout will be changed to the optimal layout.
(See "Main Menu Settings.")
Corrective Action
On the printer Control Panel, set Input Resolution to 300dpi.
(See "Main Menu Settings.")
Corrective Action
→P.722
HP-GL/2 jobs are printed 6 mm larger than specified
> HP-GL/2 problems
Corrective Action
→P.722
→P.722
→P.722
>
12
883