Specifying Netware Print Services - Canon ipf815 User Manual

10.
Press the Online button to bring the printer online.
If any of the settings is changed, a message for confirmation is displayed. In this case, press the OK button.
Important
• Be sure to complete step 10. This will activate the values you have entered.
Note
• If an error message is displayed, check the settings and correct any invalid values.
• To cancel the setup process, hold down the Stop button for a second or more.

Specifying NetWare Print Services

Before printing in a NetWare network, you must configure print services such as print servers, print queues, and so on. You
can configure the print service settings from a computer using any of the following software.
• NWADMIN
• PCONSOLE
(from Novell, provided with NetWare)
Important
• If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client soft-
ware) must be installed as the client software application.
• NetWare networking is unsupported in Windows Vista.
This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depending on the
environment.
Choosing the type of print services
Before completing print service settings, choose the type of print service. Refer to the following descriptions as needed.
Note
• In NetWare 5.1 or 6.0, NDPS may also be used as the print service. If you use NDPS, use the Novell printer
gateway included with NetWare. For details on configuring NDPS, refer to the NetWare documentation.
• NDS (Novell Directory Service) and bindery
NDS and bindery are both supported. Use the mode that is compatible with your network environment.
• Queue server mode and remote printer mode
Queue server mode and remote printer mode are both supported.
• Queue server mode
iPF815
Downloaded from ManualsPrinter.com Manuals
Network Setting > Network Setting (Windows)
Specifying NetWare Print Services
>
10
787