Other Messages - Canon ipf815 User Manual

Other Messages

GARO Wxxxx (x represents a number) ........................................................................................................... 917
ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 917
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................... 917
Top cover is open. ........................................................................................................................................... 918
Prepare for parts replacement. ........................................................................................................................ 918
Parts replacement time has passed. ............................................................................................................... 918
Unknown file. ................................................................................................................................................... 918
Multi-sensor error ............................................................................................................................................ 919
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The
paper was not advanced because the trailing edge is taped to
the roll.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
An error requiring service may have occurred.
iPF815
Downloaded from ManualsPrinter.com Manuals
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Cause
Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Cause
Error Message
Corrective Action
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the print-
er before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds be-
fore restoring the power.
If the message is displayed again, write down the error
code and message, turn off the printer, and contact
your Canon dealer for assistance.
GARO Wxxxx (x represents a number)
> Other Messages >
13
917