Canon ipf815 User Manual page 698

Adjustments for Better Print Quality
2.
Press the Menu button to display MAIN MENU.
3.
Press ▲ or ▼ to select Adjust Printer, and then press the ▶ button.
4.
Press ▲ or ▼ to select Adjust Length, and then press the ▶ button.
5.
Press ▲ or ▼ to select A:High or B:Standard/Draft, and then press the ▶ button.
6.
Press ▲ or ▼ to select Yes, and then press the OK button.
A test pattern is printed for adjustment based on the amount of paper stretching or shrinkage. The scale bar shows
8
Millimeter in 50 mm units and Inch in 1 inch units.
7.
Measure the length of the adjustment pattern. Calculate the difference between the measured length and actual
682
length. Enter it as a percentage and press the OK button.
You can adjust the value in 0.02% increments. Press ▲ to increase the value or ▼ to decrease it.
If the scale is printed shorter than actual size, set the value toward the positive side; if it is printed longer, set the
value toward the negative side.
Adjusting Line Length (Adjust Length)
Downloaded from ManualsPrinter.com Manuals
> Adjusting the feed amount
Note
• Always make sure the loaded paper matches the type of paper specified in the settings. Adjustment
cannot be completed correctly unless the loaded paper matches the settings.
Note
• A test pattern is printed in black when you choose A:High or in magenta if you choose B:Standard/
Draft.
• To cancel printing the test pattern for adjustment, hold down the Stop button for a second or more,
and then go to step 7.
Note
• You can also specify the adjustment value in Adjust Length in the Paper Details menu. In this case,
no test pattern for adjustment is printed.
>
iPF815