Canon ipf815 User Manual page 749

TrimEdge Reload
Noz. Check Freq.
CarriageScanWdth
Sleep Timer
Length Unit
Time Zone
Date Format
Date & Time
Language
Contrast Adj.
Reset PaprSetngs
Erase HDD Data
Output Method
iPF815
Downloaded from ManualsPrinter.com Manuals
Setting Item
Date
Time
High Speed
Secure High Spd.
Secure
Print
Print (Auto Del)
Description, Instructions
Specify whether to trim the leading edge of the currently
retracted roll when the roll is advanced. Cut the edge if
you are concerned about any marks left on the roll when
the roll is left in the retracted position. Selecting On will
always trim the edge when the roll is advanced from the
retracted position. Selecting Automatic will trim the edge
when the roll has been in the retracted position for two
days or more.
Specify the timing for automatic checks of nozzle clog-
ging. Choose 1 page to check once per printed page.
Choose 10 pages to check once per ten printed pages.
Choose Automatic to have the printer automatically ad-
just the timing for checks based on the frequency of noz-
zle use.
For specifying the carriage scan width during printing. Se-
lect Automatic for movement equivalent to the width of
paper loaded. Selecting Fixed will reduce any soiling on
the back of the paper, although printing may take a little
longer.
Specify the period before the printer enters sleep mode.
Choose the unit of measurement when roll length is dis-
played. You can switch the unit displayed for Roll Length
Set and the remaining paper amount displayed in the sub-
menu.
Specify the time zone. Time zone options indicate a main
city in this time zone and the difference from Greenwich
Mean Time.
Specify the date format.
Set the current date.
Set the current time. Available only if the Date setting is
specified.
Specify the language used on the Display Screen.
Adjust the Display Screen contrast level.
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Erases file management data for print job data stored on
the printer's hard disk. (See "Erasing Data on the Print-
er's Hard Disk.")
→P.750
Overwrites the entire hard disk with random data. (See
"Erasing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and random
data (one time each). Verification is performed to check if
the data was correctly written. (See "Erasing Data on the
Printer's Hard Disk.")
→P.750
Select the output method.
To print as usual, select Print. Selecting Print (Auto Del)
will print the job and then delete the data from the printer's
hard disk. Selecting Save: Box 01 will only save the print
job in the box, without printing it.
Printer Parts > Control Panel
→P.750
Main Menu Settings
>
9
733