Hp-Gl/2 Problems - Canon ipf815 User Manual

Troubleshooting

HP-GL/2 problems

Lines or images are missing in the HP-GL/2 data that was printed. ............................................................... 882
Lines Are Printed Too Thick or Thin During HP-GL/2 Printing ........................................................................ 882
HP-GL/2 jobs are printed in monochrome (or color). ...................................................................................... 882
Printed Colors in Line Drawings are Inaccurate During HP-GL/2 Printing ...................................................... 882
HP-GL/2 jobs are printed 6 mm larger than specified ..................................................................................... 883
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified ............................................ 883
HP-GL/2 printing takes a long time. ................................................................................................................ 883
The printer stops when printing a HP-GL/2 job (the carriage stops moving) ................................................... 883
Lines or images are missing in the HP-GL/2 data that was printed.
The memory is full.
An HP-GL/2 command not supported by this printer was re-
ceived.
The printer has received print data that includes HP RTL
commands when Auto Rotate is On.
Lines Are Printed Too Thick or Thin During HP-GL/2 Printing
The Line Width setting in
the main menu is incorrect.
12
HP-GL/2 jobs are printed in monochrome (or color).
Cause
The Color Mode is
incorrect.
882
Printed Colors in Line Drawings are Inaccurate During HP-GL/2 Printing
AdjustFaintLines in the main menu
is set to On.
Lines or images are missing in the HP-GL/2 data that was printed.
Downloaded from ManualsPrinter.com Manuals
> HP-GL/2 problems >
Cause
Cause
Confirm the selection in Line Width. If fine lines are printed faint, setting ThickenFi-
neLines to On in the main menu will print the lines more distinctly.
(See "Main Menu Settings.")
On the printer Control Panel, check the Color Mode setting.
(See "Main Menu Settings.")
However, for optimal Printhead performance, the printer consumes trace amounts of color ink
even when Monochrome is selected as Color Mode.
Cause
Selecting Off may help produce the expected results. However, lines in some
colors may appear broken.
Corrective Action
Check the size of the data in the print job.
Check the print job and settings.
Set Auto Rotate to Off before attempting to print again.
(See "Main Menu Settings.")
Corrective Action
→P.722
Corrective Action
→P.722
Corrective Action
→P.722
iPF815