Job Control - Oki B B8300 Reference Manual

Job Control

The job hold function can be used only if
your printer is equipped with the hard
disk drive option.
If Print after hold, Print before hold or
Proof print operation is performed on
the computer, print data will be held as a
hold job.
1. Press MENU .
MENU
PRINTJOBS ON
HOLD will appear.
2. Press OK . When pressed, a user name
BACK/C OK
and a file name of the print data stored
as a held job will appear.
3. Select the desired data by pressing the
MENU BACK/C
▼ or ▲ key on the operator panel
repeatedly until the desired print job
is displayed.
4. Press OK .
5. Enter the first digit of the password
and press OK . (This is needed only if
26
a password has been set.)
• If no password has been set, steps 5
and 6 are not needed.
• The password is entered one digit at a
time starting with the first digit. The
inactive digits are shown as "-".
• When you press the OK key to
register the first digit after entering it,
using ▼ or ▲ on the operator panel,
"*" will appear and "-" at the second
digit will blink. If you press BACK/C
you can correct the entered number.
,