Table of Contents
Advertisement
Troubleshooting (cont.)
Problem
Printing is not on desired paper
size.
Printer resident font cannot be
selected from the application.
Printer write error occurs when
using parallel port.
Only one set has been output when
more than one set has been
specified.
Two-sided printing is specified but
only a notice page is printed.
Check
Paper selection of driver set to
AUTO
Resident printer installed?
Timeout time set too short in the printer driver?
Size of the file being printed is too large for the available memory?
Check for a printed notice page.
Two-sided printing of a large number of pages is specified?
Solution or Cause
?
Ensure that the desired paper is set in a paper tray of the printer and select
AUTO
Install (or reinstall) the resident font information.
Set a longer time in the timeout setting in the printer driver.
The print file size exceeds storage capacity of this printer. Installation of a
hard disk drive will enable printing of larger size files.
The print file size exceeds storage capacity of this printer. Print additional
sets one at a time. Installation of a hard disk drive will enable printing of
larger size files.
42
in the paper selection of the printer driver.
Advertisement
Table of Contents
