Table of Contents
Advertisement
Troubleshooting (cont.)
Problem
Printed paper is wrinkled or the
image rubs off easily.
A notice page prints when a job is
sent to the printer for retention.
Password entry is requested.
Priority of reserved print jobs
cannot be changed.
Check
Paper size or weight out of the allowable range?
Paper damp?
Number of jobs reached the maximum of 100 jobs in retention?
Password set in the retention function?
Paper run out?
Exit tray full?
Solution or Cause
Use paper in the allowable range.
Be sure to store paper in the wrapper in a dry location and do not store paper
in a location that is:
humid
at a high temperature or an extremely low temperature.
No further jobs can be retained until some jobs already in retention are
deleted.
Password is needed when executing printing. If the password is not known,
printing cannot be executed.
Load paper.
Remove paper from the exit tray if it is full.
45
Advertisement
Table of Contents
