Table of Contents
Advertisement
Misfeed in the Paper Area (cont.)
3. If misfed paper is not found in step 2,
pull out paper tray 1 and remove the
misfed paper carefully.
4. Gently close the paper tray. Push the
paper tray back into the machine.
5. Gently close the duplex module. If
the machine is not equipped with a
duplex module, close the side cover.
After closing, confirm that the
misfeed message has been cleared and
the normal display appears.
6. If paper drops beyond the rear side of
the paper tray that has been pulled
out, remove the paper tray and then
remove the paper.
34
7. After pulling out the paper tray until it
stops, gently lift and pull the tray to
remove it. To reinstall the paper tray,
insert it at an angle and then push it
into the machine (seen above).
8. To remove a paper tray from a stand/
paper drawer, pull the tray out until it
stops then rotate it to the left to
disengage it from the stand. When
reinstalling it, place the left rear of the
drawer into the slot and rotate the
drawer to the right and into the stand.
Advertisement
Table of Contents
