Table of Contents
Advertisement
Setting Paper Size and Type from the Operation Panel (cont.)
• Special paper such as thick paper,
transparency film, labels, and
postcards can be set for tray 2 and the
bypass tray.
• Envelopes can be set only for tray 2.
8. Press
OK
.
9. Press ▼ or ▲ repeatedly until the
desired paper size appears.
LETTER
▼
OK?
• Depending on the selected tray, a
selection for
AUTO-AB
and
AUTO-
INCH
may appear.
•
AUTO-AB
: Select when you have
set AB system paper.
•
AUTO-INCH
: Select when you
have set inch system paper.
• When the paper system is changed
from the inch system to the AB
system or vice versa, the paper type
must be designated. Select the paper
type.
• If you have set paper of non-standard
size, select NON STANDARD. This
size can be selected when tray 2 or the
bypass tray has been selected.
10. Press
OK
.
11. To save and exit, press
Menu
13
.
Advertisement
Table of Contents
