Table of Contents
Advertisement
Fusing Unit Pressure Adjusment Levers
When feeding envelopes from the
multipurpose drawer, damage to the
envelopes or smudged printing may
occur even if envelopes are within
specification. The problem may be
reduced by shifting the fusing unit
pressure adjusting levers from the
normal position to the lower pressure
position.
Important!
Be sure to return the lever to the
normal position when finished
feeding envelopes. If not, inadequate
toner adherence, paper misfeeds or
other problems may occur.
1. Unlatch the duplex module and slide
it to the left. If the machine is not
equipped with a duplex module, open
the side cover to gain access.
2. Lower the two levers marked A and B
in the illustration.
A
Normal Position
Lower Pressure
Position
Rear Side
Front Side
16
3. Gently close the duplex module. If the
machine is not equipped with a duplex
module, close the side cover.
B
Advertisement
Table of Contents
