Misfeed In The Paper Area - Oki B B8300 Reference Manual

Misfeed in the Paper Area

Be sure to follow the misfeed removal
sequence.
Do not pull the paper tray out first as
paper may be located between the paper
tray and the paper feed section. If the
tray is pulled first, the misfed paper may
be torn and difficult to remove.
The following procedure shows the
removal sequence when the machine is
equipped with a duplex module. If the
machine is not equipped with a duplex
module or any output device, the
procedure is basically the same. The left
side of the machine must be opened and
cleared before the paper tray is pulled
out.
Misfeed in paper tray 1
1. Unlatch the duplex module and slide
it to the left. Unlatch the module and
gently move the module away from
the machine. If the machine is not
equipped with a duplex module, open
the side cover.
2. Remove the misfed paper. Be careful
not to tear the misfed paper during
removal. The paper may not be
extending out very far from inside the
33
machine but it must be removed. If
this is not possible, go to the next step.