Table of Contents
Advertisement
Misfeed in the transport area, fusing area and exit area (cont.)
3. If paper is misfed in the transport
area, turn knob B in the direction of
the arrow to remove the misfed paper.
4. If the misfed paper is inside the fusing
area, turn down the fusing unit open
tab to open the fusing unit and remove
the misfed paper.
5. If paper is misfed in the exit area,
remove it, taking care not to tear the
paper.
6. If the duplex module is equipped with
an exit tray and paper is misfed in the
exit area, remove the misfed paper as
shown in the illustration.
38
7. Gently close the duplex module.
8. If the machine is not equipped with a
duplex module, close the side cover.
9. After closing, confirm that the
misfeed message has been cleared and
the normal display appears.
Advertisement
Table of Contents
