Panasonic KX-TDA200 Features Manual page 188

1.16.1 Broadcasting
Button
CONF (Conference)
TRANSFER
FLASH/RECALL (Flash/Recall
mode)
SP-PHONE
A member extension can inform the caller that he wants to speak or join the conversation by sending a
notification. The caller will hear a notification tone and the requesting extension's information will be shown on
the display for five seconds.
Conditions
•
Hardware Requirement: An EMEC or MEC card
•
Only PTs that are permitted by COS programming can originate broadcasting calls.
•
Ring Duration
A system timer is available to limit the call ring duration at the members. When this limit is reached,
members' telephones will stop ringing. If no members have answered the call, the caller will hear a busy
tone.
•
The broadcasting call will reach a member extension regardless of settings such as Call Forwarding (except
DND).
•
If a member extension is busy and has Call Waiting for trunk calls activated when a broadcasting call is
made, a call waiting tone will be sent to the extension.
•
The call information of the caller (not members) will be recorded on SMDR.
•
A caller cannot make a broadcasting call with a call on hold.
•
Call Pickup is not available for a broadcasting call. (® 1.4.1.3 Call Pickup)
•
The broadcasting call will not reach members when:
–
the member extension has set DND for intercom calls.
–
the member extension is a PS in Wireless XDP Parallel Mode. (® 1.25.5 Wireless XDP Parallel
Mode)
Installation Manual References
KX-TDA30
2.5.8 MEC Card (KX-TDA3105)
KX-TDA100/KX-TDA200
2.3.2 MEC Card (KX-TDA0105)
KX-TDA600
2.3.2 EMEC Card (KX-TDA6105)
PC Programming Manual References
4.4 [2-3] Timers & Counters—Miscellaneous—
4.8 [2-6-1] Numbering Plan—Main—Features—
188 Feature Guide
Establishes a conversation with the current members in the order as-
signed in the broadcasting group. Pressing this button again will add
the next available member in the group to the conversation.
Removes the member who joined the conversation last. The member
can still listen to the announcement.
Removes the member who joined the conversation last. The member
will be disconnected from the broadcasting call and hear a reorder
tone.
Enables a hands-free conversation.
Broadcasting—Ring Duration
Broadcasting Operation
Function