Table of Contents
Advertisement
Adding a Telephone Handset
If you want to add a telephone handset to your unit, connect the line to the Tel socket (in
certain countries it may be necessary to use a telephone plug adaptor).
You will also need to update the telephone settings to set the ring response:
1.
Press the Setup button on the control panel.
2.
From the touch screen, press the Admin Setup button.
3.
Using the on-screen keyboard, enter the administrator password and press Enter.
4.
From the touch screen, press the Fax Setup button.
5.
From the touch screen, press the Other Settings button.
6.
From the touch screen, press the Ring Response button.
7.
Using the arrow keys, select the required response setting (between 0 and 10 times)
and press Enter.
8.
Press Close (on four screens) to store the new configuration setting and exit the
menu.
NOTE
You must also set the reception mode to the appropriate setting. See
"Reception Mode" on page 68.
Configuring Your Machine > 69
Advertisement
Table of Contents
