Oki MC860n MFP User Manual page 52

FEATURE OPTION
Print Setup EPSON FX
(cont.) Setup
(cont.)
Network Network
Menu Setup
Form Length 11 Inch, 11.7 Inch,
12 Inch
TOF Position 0.0 Inch - 1.0 Inch
Left Margin 0.0 Inch - 1.0 Inch
Fit to Letter Disable, Enable
Text Height Same, Diff
Cont Paper OFF, ON
Mode
TCP/IP Disable, Enable
IP Version IPv4, IPv4 + IPv6
NetBEUI Disable, Enable
NetBIOS over Disable, Enable
TCP
NetWare Disable, Enable
EtherTalk Disable, Enable
Frame Type Auto, 802.2, 802.3,
ETHERNET II, SNAP
IP Address Set Manual, Auto
IPv4 address xxx.xxx.xxx.xxx
Configuring Your Machine > 52
DESCRIPTION
Specifies the length of paper.
Specifies the distance of print from
the top edge of the paper.
Specifies the distance of print from
the left hand edge of the paper.
Sets the printing mode that can fit
print data, equivalent to 11 inches
(66 lines), in the LETTER-size
printable area.
Sets the height of a character.
SAME: Regardless of CPI, same
height
DIFF: As CPI, character heights
vary.
If you have multiple feed trays
installed in which the media is the
same size and type you can enable
continuous paper mode. When one
tray runs out of paper, the unit will
switch to another tray.
Enables or disables this network
protocol.
Set up the IP version.
Display condition: TCP/IP protocol
must be enabled.
Enables or disables this network
protocol.
Enables or disables this network
protocol.
Display condition: TCP/IP protocol
must be enabled.
Enables or disables this network
protocol.
Enables or disables this network
protocol.
Selects the Ethernet MAC layer
frame type.
Display condition: Netware must
be enabled.
Specifies whether IP address
allocation is automatic (DHCP) or
manually assigned.
Display condition: TCP/IP protocol
must be enabled.
Current assigned IP address.
To change, enter the address
using the numerical keypad. Press
Enter to register new address.
Display condition: TCP/IP protocol
must be enabled.