Table of Contents
Advertisement
STATUS /
MESSAGE
CODE
Warning
Disk Use Failed <%FE_ERR%>
Press <Stop> key
Warning
<%PUFLASH%> Flash Error
Warning
Received invalid data.
Press <Stop> key
Warning
Received invalid data.
Press <Stop> key
Warning
Remove the connected USB device.
Unsupported USB device is connected.
MEANING / ACTION
A disk error has occurred.
Press the Stop button to clear the error.
%FS_ERR%:
0 - General error
1- Volume not available
3 - File not found
4 - No free file descriptors
5 - Invalid number of bytes
6 - File already exists
7 - Illegal name
8 - Cant del root
9 - Not file
10 - Not directory
11 - Not same volume
12 - Read only
13 - Root dir full
14 - Dir not empty
15 - Bad disk
16 - No label
17 - Invalid parameter
18 - No contig space
19 - Cant change root
20 - FD obsolete
21 - Deleted
22 - No block device
23 - Bad seek
24 - Internal error
25 - Write only
%PUFLASH%
PU
Tray 2
Tray 3
Duplex
A job has been deleted due to corrupt
data being detected by the integrity
verification in authentication printing.
An unsupported PDL command has
been received or a spool command has
been received without HDD.
Indicates that an unsupported USB
device is connected.
This message will be displayed until the
unsupported USB device disconnected.
Troubleshooting > 158
Advertisement
Table of Contents
