Table of Contents
Advertisement
FEATURE
OPTION
Print Setup
Color Menu
(cont.)
(cont.)
Sys Config
Menu
PCL Setup
UCR
Low, Medium, High
CMY100%
Disable, Enable
Density
CMYK
OFF, ON
Conversion
Personality
Auto Emulation,
PCL, IBM PPR, EPSON
FX, PS3 Emulation
Alarm release
Manual, Auto
Auto Continue
OFF, ON
Error Report
OFF, ON
Font Source
Resident
Font No.
1|00~90
Font Pitch
0.44~10.00~99.99
CPI
Font Height
4.00~12.00~999.75
Point
Symbol Set
PC-8
Configuring Your Machine > 49
DESCRIPTION
Selects the limitation of the toner
layer thickness.
If paper curl occurs in dark
printing, selecting Medium or Low
sometimes helps reduce curl.
When enabled, black areas are
produced using 100% C, M, and Y
instead of black. This results in a
glossier finish.
Setting to OFF will simplify the
conversion process of CMYK data,
which will reduce process time.
This setting is ignored when Ink
Simulation function is used.
This item selects which industry
standard emulation your unit
should use. When set to Auto,
incoming data is examined and the
correct emulation is automatically
selected each time a print job is
received.
When Manual, non-critical
warnings, such as requests for a
different paper size, can be
cleared by pressing the RESET
button. When set to Auto, they are
cleared when the print job
resumes.
Determines whether or not the
unit will automatically recover
from a memory overflow
condition.
If ON, the unit will print error
details when a PostScript
emulation error occurs.
Specifies the location of the PCL
default font. Normally this will be
internal unless additional fonts are
installed in the expansion POM slot
or additional fonts have been
downloaded to RAM as permanent
fonts.
Sets the PCL font number.
Sets the width of the PCL default
font.
Sets the height of the PCL default
font.
PCL symbol set. If the font source
and number are changed to one
which does not support the
selected symbol set, this must be
changed to an available symbol
set for that font.
Advertisement
Table of Contents
